CAMP Naiad pulley work at height
CAMP Safety Naiad pulley work at height and rescue comes into action for the realization of hoists and during very complex and demanding operations involving heavy loads.
Naiad has a breaking load of 44 kN and the pulley, in addition to being very durable, is also comfortable to use thanks to its generous dimensions.
The pulley can accommodate ropes up to 16 mm in diameter and the rotation occurs on self-lubricating bushings with a load efficiency of 90%, an ideal solution for light uses at low speeds.
Thanks to the numerous additional attachment points on the lower side and on the sides, it is easy to set up complex pulley systems. Specifically, there is a main attachment hole for three carabiners, two secondary side holes, and an enlarged lower hole.
The body and wheel are made of aluminum alloy, with a stainless steel axle.
Possibility of use with a self-locking knot, installable from both sides (aramid cord recommended).
| Brand | CAMP |
|---|---|
| Color | Red |
| Side plates type | Fixed |
| Maximum diameter | 16 mm |
| Maximum working load | 7 kN |
| Breaking strength | 24 kN |
| Efficiency (%) | 90 |
| Weight | 280 g |
| Certification | CE EN 12278 |
On Oliunìd, shipping costs vary depending on the destination address and the type of products ordered. Check the shipping cost for the EU here.
On Oliunìd you can always return a product excluding customised products (e.g. lanyards cut to the metre, kits assembled by us, etc.) for any reason: it's not what you expected, you got the wrong shoe size, you don't like the colour of the trousers. You have 100 days to do so. Read the full policy here!