Raumer Hang Fix inox M10L Ø10x86mm double expansion Marina version
Item 157M
The Raumer Hang Fix M10L anchor bolt is made of AISI 316L stainless steel. Equipped with a double expansion element, it is ideal for mountaineering, climbing, and rescue operations on various types of rock. Thanks to the new design, the expansion can be fixed in most types of supports. The length of 86 mm allows for deeper expansion and therefore greater strength.
WARNING: The Hang Fix M10AL anchor bolt is not recommended for certain types of extremely soft rock, such as sandstone. In such cases, it is ideal to use chemical fixing anchors.
WARNING: The 157M anchor bolt è is in Marina version, further resistant to corrosion from agents present near marine environments. The Raumer company applies a treatment for marine stainless steel that consists of three phases: Solubilization - Pickling - Passivation. Unlike the normal version, the bolts with this technology feature a circular throat and a protruding point on the head to clearly identify the type of Hang Fix installed.. At the bottom, you will find information about the technology used for this type of product.
Raumer is a company based in Schio, in the province of Vicenza, specialized in the production of hardware for various sports: climbing, mountaineering, canyoning, and caving. The company was founded in 1992 by Cesare Raumer, the owner. He successfully combined his deep passion for mountains, nature, and caving with mechanical technology. The company's strength has been the use of AISI 304 stainless steel in the production of anchors from the very beginning. Currently, based on continuous experiences and acquired knowledge, AISI 316L stainless steel is used, which is even more resistant to abrasion. Raumer is therefore synonymous with quality, safety, and above all MADE IN ITALY: all production takes place in the Vicenza plant.
| Brand | Raumer |
|---|---|
| Diameter | 10 mm |
| Length | 86 mm |
| Weight | 60 g |
| Resistance to Extraction (kN) | 21 |
| Shear Resistance (kN) | 26 |
| Material | Stainless Steel - Marina |
| Certification | EN 959, UIAA |
On Oliunìd, shipping costs vary depending on the destination address and the type of products ordered. Check the shipping cost for the EU here.
On Oliunìd you can always return a product excluding customised products (e.g. lanyards cut to the metre, kits assembled by us, etc.) for any reason: it's not what you expected, you got the wrong shoe size, you don't like the colour of the trousers. You have 100 days to do so. Read the full policy here!